NABERS Energy Ratings
Ratings for an office base building, tenancy or whole building, depending on the services and spaces within scope.[2]
NABERS Energy & Water Ratings
A rating you can stand behind.
Accredited NABERS Energy and Water assessments for office buildings, led directly by Jarrad and Raf and supported by practical metering and data expertise.[3]
Robust, thoroughly validated submissions.
NABERS Energy and Water for Offices ratings must be performed by a NABERS Accredited Assessor and follow the current rules for gathering, interpreting and using data.[1]
Office ratings use real operational data collected over 12 months.[2] A NABERS rating benchmarks your building’s performance, while our services can highlight where further investigation or improvement may be worthwhile.
Looking for an office lighting assessment? Explore our Tenancy Lighting Assessment (TLA) service. We also provide Building Energy Efficiency Certificate (BEEC) assessment support.
Assessment services
The right rating for the right scope.
NABERS Water Ratings
Office water assessments covering the amount of water used and recycled across the whole building.[2]
Single assets and portfolios
A consistent assessment approach for one commercial office building or a multi-asset rating program.
Direct assessor access
A recognised rating, handled directly.
Jarrad Gleeson and Rafael Miranda Ramos are listed in the NABERS Accredited Assessor register for office Energy and Water ratings.[3] Jarrad is also an accredited assessor under the Commercial Building Disclosure (CBD) Program.[4]
- Work directly with an accredited assessor throughout the engagement
- Confirm rating scope, meter boundaries and tenancy arrangements
- Validate energy and water data before submission
Indicative projection
See the direction before certification.
Where sufficient data is available, Taktet can use monitored consumption trends and assessor knowledge to provide an indicative projection of rating direction and compare current consumption with prior periods.
Important: any projection is an estimate only—not a certified NABERS rating or a guarantee of the final result. NABERS states that calculator results are indicative and cannot be promoted or published as official ratings.[5]
Our process
Clear from scope to submission.
- 1
Review
Confirm the building, rating scope, meters, tenancies and available data.
- 2
Price
Agree a quote matched to the size and complexity of the assessment.
- 3
Assess
Collect and validate the evidence, then complete the assessment.
- 4
Submit & support
Submit the rating and support the application through certification.
Currency and citations
Rules and sources used.
Checked 21 August 2026.
Technical claims on this page were checked against the NABERS Energy and Water for Offices Rules v5.2, published 9 April 2025. Rules and program requirements can change; confirm the current NABERS requirements before relying on this page.
- NABERS Energy and Water for Offices RulesVersion 5.2, published 9 April 2025.
- NABERS: Office BuildingsEnergy and Water rating scopes, benchmarking and operational-data requirements.
- NABERS Accredited Assessor registerSearch Jarrad Gleeson, Rafael Miranda Ramos or Taktet Pty Ltd.
- CBD Accredited Assessor registerOfficial register of assessors authorised to conduct TLAs and apply for BEECs.
- NABERS: Setting targets using reverse calculatorsOfficial limits on using indicative calculator results.
Need a NABERS Energy or Water rating?
Talk directly with an accredited assessor about your building or portfolio.